1. What is LC Gold Plated Lead Frame
An LC (inductor-capacitor) gold plated lead frame is a component used in electronic circuits to provide electrical connectivity to a surface mount device (SMD). The lead frame is a small metal frame that is designed to hold the SMD in place and provide electrical connections to the circuit board.
The LC gold plated lead frame is made of a base metal, such as copper or alloy, which is then plated with a thin layer of gold. The gold plating provides several benefits, including improved conductivity, corrosion resistance, and solderability. The gold plating also provides a barrier against oxidation and prevents the base metal from reacting with other materials in the circuit.
LC gold plated lead frames are commonly used in high-frequency circuits, such as those found in RF (radio frequency) applications. The inductor and capacitor components are mounted on the lead frame and connected to the circuit board via the gold-plated leads. The gold plating provides a low resistance path for the electrical signals, which helps to minimize signal loss and improve overall circuit performance.
Overall, the LC gold plated lead frame is a reliable and effective component that is widely used in electronic circuits where high-frequency performance and reliability are critical.
2. Material of LC Gold Plated Lead Frame
The LC gold plated lead frame is typically made of a base metal, such as copper or an alloy of copper. Copper is a common choice for the base metal because of its excellent electrical conductivity, high thermal conductivity, and good strength.
The base metal is plated with a thin layer of gold using a process called electroplating. During electroplating, a current is passed through a solution containing gold ions, causing the gold to be deposited onto the surface of the lead frame. The gold plating provides several benefits, including improved conductivity, corrosion resistance, and solderability.
In some cases, the lead frame may also be coated with other materials to provide additional properties or improve its performance. For example, a layer of nickel may be added to the base metal before the gold plating to improve the adhesion of the gold and provide additional corrosion resistance. Other coatings, such as tin or silver, may also be used depending on the specific application.
Overall, the materials used in the construction of the LC gold plated lead frame are chosen for their electrical and mechanical properties, as well as their ability to withstand the harsh conditions of electronic circuits.
3. parameter of LC Gold Plated Lead Frame
The parameters of an LC gold plated lead frame can vary depending on the specific application and the requirements of the circuit. However, some common parameters that may be specified for this component include:
(1). Dimensions: The physical dimensions of the lead frame will depend on the size and shape of the surface mount device that it is designed to hold. The length, width, and thickness of the lead frame may be specified, as well as the spacing between the leads.
(2).Material: The base metal used for the lead frame may be specified, as well as any coatings or platings that are applied to the surface.
(3).Gold plating thickness: The thickness of the gold plating on the lead frame may be specified in microns or in weight, such as microinches or milligrams per square inch. The thickness of the gold plating can affect the conductivity, solderability, and corrosion resistance of the component.
(4).Electrical properties: The inductance and capacitance of the component may be specified, as well as the frequency range over which the component is designed to operate.
(5).Temperature range: The temperature range over which the lead frame is designed to operate may be specified, as well as any temperature coefficient of the component.
(6).Solderability: The solderability of the component may be specified, including the type of solder alloy that is recommended for use with the component.
Overall, the parameters of an LC gold plated lead frame are chosen to ensure that the component meets therequirements of the specific application and provides reliable and consistent performance.
4. Our company
Strong metal was established in June 2003 with a total registered capital of 67 million yuan and a totalconstruction area of 30,000 square meters. It has 5 factories in total which are located in Nantong,Taicang, Nanjing, Vietnam, and Shanghai.
Strong has many advanced production equipment: 50+ punch press machines (highest 1000 ton),20+plastic injection machines (highest 740ton), 20+ bending machines (highest 600 ton), 20+ automatic welding arms, 50+ welding working tables, 8+ laser cutting machines, and a 400m powder coating line,etc. In terms of the QC testing tool, We have CMM, a two-dimensional measuring instrument, hardness tester, salty frog tester, etc.In 2021, the yearly turnover of Strong exceeded 200 million yuan and we keep going to search and offer better solutions to our customers and make more value to create a better world.Strong focused on metal manufacturing and has comprehensive ability in mold self-design, metal stamping, sheet metal, laser cutting, powder coating, welding, plastic injection, etc.
5. FAQ
Q: Do you provide samples? is it free or extra?
A: Yes, we could offer the sample for free but do not pay the freight cost.
Q: How long is your delivery time?
A: Generally it is 5-10 days if the goods are in stock. or it is 15-20 days if the goods are not in stock,it is according to quantity.
Q: Are you a trading company or manufacturer?
A: We are a manufacturer.
Q: What are your terms of payment?
A: Payment<=1000USD, 100% in advance. Payment>=1000USD, 30% T/T in advance ,balance
before shipment.If you have another question, pls feel free to contact us.
Product Tags:
|
|
Precision RF SMD Inductor Capacitor Gold Plated Surface Lead Frame For Electronic Circuits Images
|
